NICE ROBUS 1000 RB1000 1000 KG Sliding Gate Motor
Price 1,980 AEDIn Stock
NICE ROBUS 1000 RB1000 Sliding Gate Motor UAE
NICE ROBUS 1000 RB1000 is a powerful 24V automatic sliding gate motor designed for residential, commercial and industrial sliding gates weighing up to 1000 KG. Manufactured by NICE, the RB1000 combines high operating force with intelligent electronic control, BlueBUS technology, obstacle detection, automatic travel learning and smooth acceleration and slowdown.
The NICE RB1000 is suitable for compatible sliding gate leaves up to 12 metres long. It provides a maximum speed of approximately 0.28 m/s, maximum start-up force of 900 N and nominal operating force of 500 N. The original RB1000 features an integrated control unit and electromechanical limit switch.
NICE ROBUS 1000 RB1000 Key Features
- Original NICE sliding gate motor
- Series: ROBUS 1000
- Motor model: RB1000
- Maximum sliding gate weight: 1000 KG
- Maximum gate leaf length: 12 metres
- 24V DC irreversible electromechanical motor
- 230V AC mains power supply
- Maximum power: 450 W
- Maximum gate speed: 0.28 m/s
- Maximum start-up force: 900 N
- Nominal operating force: 500 N
- Maximum start-up torque: 27 Nm
- Nominal torque: 15 Nm
- Electromechanical limit switch
- Integrated electronic control unit
- NICE BlueBUS technology
- Automatic gate travel learning
- Electronic obstacle detection
- Adjustable acceleration and slowdown
- Temperature monitoring
- Master / Slave synchronization capability
- Manual emergency release
- Optional backup battery capability
- Protection rating: IP44
NICE ROBUS 1000 RB1000 Technical Specifications
| Brand | NICE |
| Series | ROBUS 1000 |
| Model | RB1000 |
| Product Type | Automatic Sliding Gate Motor |
| Maximum Gate Weight | 1000 KG |
| Maximum Gate Length | 12 m |
| Mains Power Supply | 230V AC, 50/60Hz |
| Motor Voltage | 24V DC |
| Current Draw | 2.3 A |
| Maximum Power | 450 W |
| Maximum Speed | 0.28 m/s |
| Maximum Start-Up Torque | 27 Nm |
| Maximum Start-Up Force | 900 N |
| Nominal Torque | 15 Nm |
| Nominal Force | 500 N |
| Cycles / Hour – Gate up to 4 m | 50 |
| Cycles / Hour – Gate up to 8 m | 25 |
| Limit Switch | Electromechanical |
| Communication | NICE BlueBUS |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +50°C |
| Dimensions | 330 × 210 × 303 mm |
| Weight | 13 KG |
1000 KG Automatic Sliding Gate Motor
The NICE ROBUS 1000 RB1000 is designed for compatible sliding gates weighing up to 1000 KG. Its higher force and gate capacity make it suitable for large villa gates, residential compounds, commercial entrances and other applications requiring a stronger automatic sliding gate operator.
Gate weight alone should not be used to select an operator. Gate length, wheel condition, track alignment, gear rack, mechanical resistance and expected daily operating frequency should also be checked before installation.
Sliding Gates Up to 12 Metres
The NICE RB1000 supports compatible sliding gate leaves measuring up to 12 metres. This gives the ROBUS 1000 additional capacity for longer entrances compared with smaller ROBUS models.
The sliding gate must move smoothly by hand before automation. Damaged wheels, uneven tracks, excessive friction or incorrect gate alignment should be repaired before installing the motor.
24V DC Sliding Gate Motor
The ROBUS 1000 uses a 24V DC electromechanical motor powered through its integrated electronic control system from a 230V AC mains supply.
The low-voltage motor system enables electronic management of speed, force, acceleration, slowdown, obstacle detection and other automatic gate functions.
900N Maximum Starting Force
The NICE RB1000 provides a maximum start-up torque of 27 Nm, corresponding to approximately 900 N maximum force. During nominal operation, the motor provides approximately 15 Nm torque and 500 N force.
This higher operating force distinguishes the RB1000 from the smaller RB600 and makes it suitable for heavier compatible sliding gates.
0.28 m/s Sliding Gate Speed
The standard NICE ROBUS 1000 provides a maximum gate movement speed of approximately 0.28 metres per second.
The RB1000 is designed primarily for higher gate capacity and dependable operation rather than high-speed opening. Where opening speed is the main requirement, a dedicated NICE high-speed operator should be selected.
NICE BlueBUS Technology
The NICE BlueBUS system simplifies connection of compatible NICE safety and automation accessories. Compatible BlueBUS devices can communicate with the control unit through only two wires.
This makes it easier to connect compatible NICE photocells and other BlueBUS accessories while reducing installation wiring.
NICE RBA3 Control Unit
The original NICE RB1000 is commonly equipped with the NICE RBA3 series integrated electronic control unit. The control system manages gate travel, safety devices, motor force, slowdown, radio commands and compatible NICE accessories.
When ordering a replacement control board, always confirm the exact board reference printed on the existing controller because different ROBUS generations can use different electronics.
Electromechanical Limit Switch
The standard NICE RB1000 uses an electromechanical limit switch for the gate opening and closing end positions.
NICE also produced the RB1000P, which uses an inductive limit switch. Therefore, replacement limit-switch components should always be selected according to the exact motor model.
Automatic Gate Travel Learning
The integrated control system supports automatic learning of gate travel during commissioning. This allows the controller to establish the required opening and closing movement and manage acceleration and slowdown according to the programmed configuration.
Obstacle Detection & Safety
The ROBUS 1000 includes electronic obstacle detection and motor-force management. When abnormal resistance is detected during movement, the controller can respond according to its programmed safety settings.
Compatible safety devices such as NICE EPMB BlueBUS photocells can be connected to provide additional protection for vehicles and pedestrians.
Smooth Acceleration & Slowdown
The electronic controller manages acceleration when the sliding gate starts moving and slowdown as it approaches the opening and closing positions.
Controlled acceleration and deceleration help reduce mechanical shock to the gate motor, pinion, gear rack, wheels, track and gate structure.
Intensive Gate Operation
The RB1000 is designed for a higher operating frequency than smaller residential operators. NICE specifies up to 50 cycles per hour for gate leaves up to 4 metres and approximately 25 cycles per hour for gates up to 8 metres, subject to installation and operating conditions.
Temperature Monitoring
The ROBUS control system incorporates temperature monitoring to help manage motor operation according to environmental conditions and provide additional protection to the automation system.
Master / Slave Dual Gate Function
The NICE ROBUS platform supports a Master / Slave configuration for suitable installations using two synchronized sliding gate operators.
This can be used for opposing sliding gates where two motorized gate leaves need to operate together in a coordinated sequence.
Manual Emergency Release
The NICE RB1000 incorporates a manual emergency release that allows the gate to be disengaged from the motor and operated manually when required, such as during maintenance or a power failure.
NICE ROBUS 1000 Kit Includes
- 1 × NICE RB1000 1000 KG sliding gate motor
- 1 × Integrated NICE RBA3 series control unit
- 2 × NICE ON2E remote controls
- 1 × NICE EPMB BlueBUS photocell pair
- 1 × NICE OXI radio receiver
- 4 × 1 metre nylon gate racks
- 1 × Push button
Note: Kit contents can vary according to stock and supplier package. Confirm the exact included accessories before ordering.
NICE ROBUS 1000 Compatible Accessories
- NICE OXI radio receiver
- NICE remote controls
- NICE EPMB BlueBUS photocells
- NICE flashing warning lights
- Nylon sliding gate racks
- Steel sliding gate racks
- Push button switches
- Key selector switches
- GSM gate openers
- Wi-Fi gate controllers
- RFID access control systems
- Vehicle loop detectors
NICE ROBUS 600 vs ROBUS 1000
| Specification | RB600 | RB1000 |
|---|---|---|
| Maximum Gate Weight | 600 KG | 1000 KG |
| Maximum Gate Length | 8 m | 12 m |
| Power | 515 W | 450 W |
| Maximum Speed | 0.31 m/s | 0.28 m/s |
| Maximum Force | 600 N | 900 N |
| Nominal Force | 300 N | 500 N |
| Cycles / Hour – up to 4 m | 40 | 50 |
The RB600 is faster at approximately 0.31 m/s, while the RB1000 is designed for substantially heavier and longer gates with significantly greater operating force.
NICE ROBUS 1000 Applications
- Large villa sliding gates
- Residential compound gates
- Apartment building entrances
- Commercial sliding gates
- Warehouse entrances
- Factory gates
- Controlled vehicle entrances
- Sliding gates up to 1000 KG
- Sliding gate leaves up to 12 metres
NICE ROBUS 1000 Installation UAE
Professional installation of the NICE ROBUS 1000 RB1000 sliding gate motor is available for villas, residential compounds, commercial properties and compatible industrial entrances throughout the UAE.
Installation can include motor mounting, nylon or steel gear rack installation, electrical connection, BlueBUS photocell installation, receiver setup, remote-control programming, gate travel learning, slowdown adjustment and complete safety testing.
NICE ROBUS 1000 Gate Motor UAE
We supply NICE ROBUS 1000 RB1000 sliding gate motors throughout the UAE with installation, programming, maintenance and spare-parts support.
Service is available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Before Ordering: Confirm the sliding gate weight, leaf length, track condition, wheel condition and expected operating frequency. For replacement motors and spare parts, confirm whether the existing operator is RB1000 or RB1000P.
