NICE RUN 2500 RUN2500 2500 KG Sliding Gate Motor
Price 2,800 AEDIn Stock
NICE RUN 2500 RUN2500 Sliding Gate Motor UAE
NICE RUN 2500 RUN2500 is a powerful 230V heavy-duty industrial sliding gate motor designed for automatic sliding gates weighing up to 2500 KG. Manufactured by NICE, the RUN2500 combines high operating force with advanced electronic gate control, BlueBUS technology, obstacle detection, automatic travel management and smooth gate operation.
The NICE RUN2500 delivers up to 50 Nm maximum start-up torque, corresponding to approximately 1390 N maximum force. Its nominal operating performance is approximately 30 Nm / 830 N. Designed for intensive applications, it is an excellent choice for warehouses, factories, industrial compounds, commercial properties and other heavy sliding gates throughout the UAE.
NICE RUN 2500 Key Features
- Original NICE heavy-duty industrial sliding gate motor
- Series: RUN
- Model: RUN2500
- Maximum sliding gate weight: 2500 KG
- Heavy-duty industrial gate automation
- 230V AC electromechanical gear motor
- Maximum power: 870 W
- Current absorption: 3.8 A
- Maximum start-up torque: 50 Nm
- Maximum start-up force: 1390 N
- Nominal torque: 30 Nm
- Nominal force: 830 N
- Maximum no-load speed: 10 m/min – approx. 0.17 m/s
- Speed at nominal torque: 8.5 m/min – approx. 0.14 m/s
- Electromechanical limit switch
- Integrated NICE RUA2 control unit
- NICE BlueBUS technology
- Plug-in radio receiver connection
- Automatic gate travel learning
- Electronic obstacle detection
- Smooth start and slowdown
- Partial opening / pedestrian function
- Master / Slave function for opposing sliding gates
- Temperature management
- Power-saving functions
- Manual emergency release
- Designed for intensive industrial use
NICE RUN2500 Technical Specifications
| Brand | NICE |
| Series | RUN |
| Model | RUN2500 |
| Product Type | Heavy-Duty Industrial Sliding Gate Motor |
| Maximum Gate Weight | 2500 KG |
| Power Supply | 230V AC, 50Hz |
| Current Absorption | 3.8 A |
| Maximum Power | 870 W |
| Maximum Start-Up Torque | 50 Nm |
| Maximum Start-Up Force | 1390 N |
| Nominal Torque | 30 Nm |
| Nominal Force | 830 N |
| No-Load Speed | 10 m/min (approx. 0.17 m/s) |
| Speed at Nominal Torque | 8.5 m/min (approx. 0.14 m/s) |
| Operating Frequency | Up to 15 cycles/hour with a 15 m gate at nominal torque |
| Maximum Continuous Operation | Up to 60 minutes at nominal torque |
| Control Unit | NICE RUA2 |
| Limit Switch | Electromechanical |
| Communication | NICE BlueBUS |
| Pinion | Z18 – Module 4 |
| Protection Rating | IP44 |
| Operating Temperature | -20°C to +50°C |
| Dimensions | 400 × 255 × 390 mm |
| Weight | Approx. 25 KG |
2500 KG Heavy-Duty Sliding Gate Motor
The NICE RUN2500 is designed for demanding sliding gate applications with gate weights up to 2500 KG. Its heavy-duty construction and high operating force make it particularly suitable for industrial and commercial entrances where smaller residential gate motors do not provide sufficient capacity.
The motor should not be selected according to gate weight alone. Gate length, wheel condition, track alignment, gear rack condition, mechanical resistance and daily operating frequency should all be checked before installation.
230V Industrial Sliding Gate Operator
The NICE RUN 2500 operates from a 230V AC power supply and is designed specifically for demanding industrial sliding gate automation.
Its powerful electromechanical drive provides up to 50 Nm start-up torque and approximately 1390 N maximum starting force, allowing it to automate correctly installed heavy sliding gates within its specified operating limits.
1390N Maximum Starting Force
The RUN2500 develops approximately 50 Nm maximum start-up torque, corresponding to approximately 1390 N maximum force.
At nominal operating conditions, the motor provides approximately 30 Nm torque and 830 N force. This gives the RUN2500 substantially greater operating capacity than smaller RUN models.
NICE RUN2500 Gate Speed
The NICE RUN2500 reaches approximately 10 metres per minute (0.17 m/s) without load. At nominal operating torque, gate movement is approximately 8.5 metres per minute (0.14 m/s).
Actual gate speed can vary according to gate weight, mechanical resistance, installation condition and controller configuration.
Designed for Intensive Industrial Use
The NICE RUN 2500 is engineered for intensive automatic gate applications. NICE specifies up to approximately 15 cycles per hour with a 15 metre gate at nominal torque, together with up to approximately 60 minutes of continuous operation under the specified operating conditions.
Actual operating capacity depends on gate length, weight, ambient temperature and mechanical resistance.
NICE RUA2 Integrated Control Unit
The RUN2500 configuration supplied on this page includes the NICE RUA2 integrated electronic control unit. The control system manages motor operation, safety devices, gate travel, slowdown, partial opening, radio commands and other automatic gate functions.
For replacement control boards, always check the exact board reference installed inside the existing motor before ordering.
NICE BlueBUS Technology
NICE BlueBUS technology allows compatible NICE safety and automation accessories to communicate with the control system using a simplified two-wire connection.
Compatible BlueBUS photocells can therefore be connected without the more complex wiring required by conventional photocell systems.
Automatic Gate Travel Learning
The integrated RUN control system supports automatic learning of the sliding gate movement. During commissioning, the controller learns the required gate travel and uses this information to manage the opening, closing and slowdown positions.
Electronic Obstacle Detection
The NICE RUN2500 monitors motor operation to detect abnormal resistance during gate movement. When an obstacle or excessive resistance is detected, the control system can respond according to its programmed safety configuration.
Electronic obstacle detection should be combined with correctly installed photocells, safety edges and other safety devices required for the individual installation.
Smooth Start & Slowdown
The RUN2500 control system manages acceleration and slowdown to provide smoother movement of the heavy sliding gate. Controlled starting and stopping helps reduce mechanical shock to the motor, pinion, gear rack, wheels and gate structure.
Electromechanical Limit Switch
The standard NICE RUN2500 uses an electromechanical limit switch to determine the fully open and fully closed positions of the sliding gate.
This is important when ordering replacement parts because other RUN2500 versions use different limit-switch technologies.
Partial Opening / Pedestrian Function
The NICE RUN2500 supports partial gate opening, allowing the gate to open only to a programmed position when full vehicle access is not required.
This can be useful for pedestrian access or controlled entrances where opening the entire heavy gate is unnecessary.
Master / Slave Dual Sliding Gate Function
The NICE RUN platform supports Master / Slave synchronization for suitable installations using two opposing automatic sliding gates.
This allows two compatible RUN operators to work together for coordinated opening and closing of opposing gate leaves.
Manual Emergency Release
The RUN2500 incorporates a manual emergency release. In the event of a power failure or during maintenance, the operator can be mechanically released with the appropriate key so that the gate can be moved manually.
NICE RUN 2500 Kit Includes
- 1 × NICE RUN2500 2500 KG sliding gate motor
- 1 × Integrated NICE RUA2 control unit
- 2 × NICE ON2E remote controls
- 1 × NICE EPMB BlueBUS photocell pair
- 1 × NICE OXI radio receiver
- 1 × Flashing warning light
- 1 × Push button
Note: Package contents can vary according to available stock and supplied configuration. Confirm the exact included accessories before ordering.
NICE RUN2500 Applications
- Industrial sliding gates
- Factory entrances
- Warehouse sliding gates
- Commercial compounds
- Logistics facilities
- Large residential compounds
- Heavy commercial entrances
- Industrial parking entrances
- Controlled vehicle access points
- Heavy sliding gates up to 2500 KG
NICE RUN2500 vs RUN2500P vs RUN2500I
| Model | Gate Capacity | Limit Switch | Special Feature |
|---|---|---|---|
| RUN2500 | 2500 KG | Electromechanical | Standard RUN2500 |
| RUN2500P | 2500 KG | Inductive | Proximity limit switch |
| RUN2500I | 2500 KG | Electromechanical | Integrated inverter |
Important: This product page is specifically for the standard NICE RUN2500 with electromechanical limit switch. RUN2500P and RUN2500I are different versions and should not be mixed when specifying replacement parts.
NICE RUN 1800 vs RUN 2500
| Specification | RUN1800 | RUN2500 |
|---|---|---|
| Maximum Gate Weight | 1800 KG | 2500 KG |
| Maximum Torque | 40 Nm | 50 Nm |
| Maximum Force | 1110 N | 1390 N |
| Nominal Torque | 20 Nm | 30 Nm |
| Nominal Force | 560 N | 830 N |
| Maximum Power | 700 W | 870 W |
The RUN2500 is the stronger option for heavier industrial sliding gates, while RUN1800 is suitable where the required gate weight and operating conditions remain within its lower capacity.
NICE RUN 2500 Gate Motor UAE
We supply NICE RUN 2500 RUN2500 heavy-duty sliding gate motors throughout the UAE for factories, warehouses, commercial compounds, industrial facilities and other demanding gate automation applications.
Supply, professional installation, programming, maintenance and spare-parts support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Before Ordering: Confirm the gate weight, gate dimensions, wheel and track condition, mechanical resistance and expected operating frequency. For replacement components, confirm whether your operator is RUN2500, RUN2500P or RUN2500I.
