DEA LIVI 403N 600 KG Sliding Gate Motor

DEA LIVI 403N 600 KG Automatic Sliding Gate Motor UAE

DEA LIVI 403N is a reliable 230V automatic sliding gate motor designed for residential sliding gates weighing up to 600 kg. Manufactured by DEA SYSTEM, the LIVI 403N combines robust electromechanical construction, electronic force adjustment and an integrated 212E control unit for dependable residential gate automation.

With 320W power input, approximately 340N thrust force and a gate speed of 10 metres per minute, the DEA LIVI 600 KG is suitable for villas, residential buildings and private driveway gates. The operator supports gate leaves up to approximately 5 metres long when the gate is correctly installed and moves freely.

DEA LIVI 403N Key Features

• Original DEA SYSTEM sliding gate motor
• Model: LIVI 403N / 212E
• Maximum gate weight: 600 kg
• Maximum gate length: up to 5 metres
• Motor supply: 230V AC
• Power input: 320W
• Maximum thrust force: 340N
• Gate speed: 10 m/min
• Up to 18 manoeuvres per hour
• Up to 60 manoeuvres per day
• Integrated DEA 212E control unit
• Electromechanical limit switches
• Electronic thrust-force adjustment
• Automatic programming of working time
• Controlled inputs for compatible safety devices
• Manual release for operation during power failure
• Fixing plate included
• Protection rating: IPX4
• Operating temperature: -20°C to +50°C

DEA LIVI 600 KG Technical Specifications

600 KG Residential Sliding Gate Motor

The DEA LIVI 403N is designed for residential sliding gates weighing up to 600 kg. This capacity makes it suitable for villa driveway gates, private residential entrances and housing-estate gate automation where moderate daily operation is required.

Correct motor selection should consider not only the total gate weight but also the gate length, wheel condition, track alignment, rack installation and mechanical rolling resistance.

230V AC Sliding Gate Operator

The LIVI 403N uses a reliable 230V AC electromechanical motor with approximately 320W power input. This conventional mains-powered design is suitable for residential installations where dependable everyday automatic gate operation is required.

The operator develops approximately 340N thrust force and incorporates electronic thrust-force regulation through its compatible control system.

10 m/min Automatic Gate Speed

The DEA LIVI 600 KG provides a nominal gate movement speed of approximately 10 metres per minute. This provides controlled opening and closing for residential sliding gates while maintaining dependable mechanical operation.

Actual opening time depends on the total gate travel distance, installation condition and controller configuration.

DEA 212E Integrated Control Unit

The DEA LIVI 403N 212E incorporates the control unit inside the motor housing, creating a compact automatic gate system and simplifying installation.

The controller provides important automation functions including electronic thrust-force adjustment, automatic working-time programming and inputs for compatible safety accessories.

Accessible Control Panel

The LIVI design places the control electronics in an accessible position inside the operator. This makes programming, wiring and future maintenance easier, particularly where installation space around the sliding gate motor is limited.

Electronic Force Regulation

The DEA LIVI control system provides electronic adjustment of the motor thrust force. Correct force adjustment helps the installer configure the motor according to the weight and mechanical characteristics of the gate.

Force settings should always be combined with appropriate safety devices and a mechanically sound gate installation.

Electromechanical Limit Switches

The LIVI 403N uses electromechanical limit switches to determine the gate's fully open and fully closed positions. Correct adjustment of these limits is important for reliable automatic operation and accurate stopping positions.

Manual Release During Power Failure

If mains power is unavailable, the DEA LIVI operator can be mechanically released so that the sliding gate can be moved manually. This provides access to the property during a power failure or when maintenance is required.

The gate should always be moved carefully after manual release and the automation should be correctly re-engaged before returning to automatic operation.

DEA LIVI 600 KG Kit Includes

• 1 × DEA LIVI 403N 600 KG sliding gate motor
• 1 × DEA 212E integrated control unit
• 2 × DEA GT2 remote controls
• 1 × Pair of LINEAR photocell safety sensors
• 1 × Compatible radio receiver
• 1 × Blinker / flashing light
• 4 m Nylon gate rack
• 1 × Push button

DEA LIVI 600 KG Applications

• Villa sliding gates
• Residential driveway gates
• Private property entrances
• Housing-estate entrances
• Residential compounds
• Sliding gates up to 600 kg
• Gate leaves up to approximately 5 metres

Compatible Gate Access Control

The DEA LIVI sliding gate motor can be integrated with compatible gate automation and access-control accessories, depending on the installed controller and receiver.

• DEA remote controls
• Photocell safety sensors
• GSM gate opener
• RFID access control
• Long-range UHF RFID vehicle access
• Keypad access control
• Push button
• Intercom system
• Vehicle loop detector

DEA LIVI 600 KG Sliding Gate Motor UAE

We supply DEA LIVI 403N 600 KG sliding gate motors throughout the UAE for residential automatic sliding gate applications.

Professional supply, installation, programming, maintenance and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Before Ordering: Confirm the approximate gate weight, gate length, wheel and track condition, daily operating frequency and required access-control accessories to ensure the DEA LIVI 403N is suitable for your installation.