BENINCA BILL50M Swing Gate Motor – Up to 4M Per Leaf

BENINCA BILL50M 4M Commercial Swing Gate Motor UAE

BENINCA BILL50M is a professional 230V electromechanical linear swing gate actuator designed for automatic swing gates with leaves up to 4.0 metres each. BENINCA classifies the BILL50M for commercial applications, making it suitable for large villa gates, residential compounds, commercial entrances and other medium-to-large swing gate installations.

The BILL50M delivers up to 2800 N maximum thrust with a long 500 mm standard stroke, 21-second opening time and IP54 protection. Its stainless-steel stem and protected worm-screw construction are particularly suitable for outdoor installations exposed to dust, sand and aggressive atmospheric conditions.

BENINCA BILL50M Key Features

• Genuine BENINCA swing gate actuator
• Model: BILL50M
• For swing gates up to 4.0 m per leaf
• Commercial-use swing gate automation
• 230V AC electromechanical geared motor
• Irreversible operator design
• 2800 N maximum thrust
• 21-second opening time
• 500 mm standard stroke
• 520 mm maximum stroke
• 30% duty cycle
• IP54 protection rating
• Stainless-steel actuator stem
• Worm screw protected by scraper ring
• Suitable for dusty and sandy environments
• Compact linear actuator design
• Easy manual release access from above
• Available in right-hand and left-hand versions
• Compatible with professional BENINCA external control units
• Prepared for modern BENINCA automation accessories when used with a compatible control system
• Grease lubrication
• Operating temperature from -20°C to +50°C

BENINCA BILL50M Technical Specifications

Swing Gate Motor for Gates Up to 4 Metres Per Leaf

The BENINCA BILL50M is designed for swing gate leaves measuring up to 4.0 metres. For a conventional double-leaf swing gate, one BILL50M actuator is normally installed on each gate leaf.

Correct actuator selection should consider gate leaf length, gate weight, hinge geometry, wind exposure, gate construction and daily operating frequency rather than leaf length alone.

2800 N Maximum Thrust

The BILL50M provides a maximum thrust of 2800 N, delivering powerful and controlled movement for correctly installed large swing gates.

Its combination of high thrust and long actuator stroke makes the BILL50M suitable for larger gate leaves where shorter BILL actuators may not provide the required installation geometry.

500 mm Long-Stroke Gate Actuator

A major feature of the BENINCA BILL50M is its 500 mm standard stroke, with a maximum available stroke of 520 mm. This longer travel provides greater flexibility when installing the actuator on large swing gate leaves.

The specified opening time is approximately 21 seconds. Actual opening time can vary depending on installation geometry and the required gate opening angle.

Designed for Dusty & Sandy Environments

The BILL50M uses a stainless-steel stem together with a worm screw protected by a scraper ring. BENINCA specifically identifies this construction as suitable for locations exposed to dust, sand and aggressive atmospheric agents.

These characteristics make the BILL50M particularly suitable for professional outdoor gate automation installations in UAE conditions.

Compact Design for Wrought-Iron Gates

The BILL series features a clean and compact linear design particularly suited to wrought-iron and decorative swing gates. The compact installation dimensions help maintain the appearance of the entrance while providing professional automatic gate operation.

Manual Release System

The BENINCA BILL50M provides convenient access to its manual release mechanism from above. This allows the actuator to be released so the gate can be moved manually during a power failure or maintenance procedure.

External BENINCA Control Board

The BILL50M does not contain an integrated control board. One or two BILL50M actuators must be connected to a compatible external BENINCA 230V swing gate control unit.

Depending on the selected controller, the system can support remote controls, automatic closing, pedestrian opening, photocell safety inputs, electric locks, flashing lights, torque adjustment and other professional gate automation functions.

Virtual Encoder Management

The BILL50M does not contain a conventional physical encoder. BENINCA specifies that the encoder signal can be recreated by a compatible control unit using measurements of the electric motor's operating parameters.

This allows compatible BENINCA electronics to optimize slowdowns, track gate travel and manage motor torque in relation to gate position.

BENINCA BILL30M vs BILL40M vs BILL50M

BENINCA BILL50M Applications

• Large villa swing gates
• Commercial swing gates
• Residential compounds
• Wrought-iron gates
• Decorative steel gates
• Double-leaf swing gates
• Single-leaf swing gates
• Commercial property entrances
• Private driveway gates

Our UAE BENINCA BILL50M Kit Includes

• 2 × BENINCA BILL50M 230V Swing Gate Motors
• 1 × BENINCA 230V Swing Gate Control Unit
• 1 × Pair Photocell Safety Sensors
• 1 × Flashing Warning Light
• 2 × Remote Controls
• 2 × Motor Fixing Brackets
• 1 × Exit Push Button
• 2 × Manual Release Keys

Note: Package contents may vary according to stock and the selected configuration. Confirm the exact supplied accessories when ordering.

BENINCA BILL50M Supply & Installation UAE

We supply BENINCA BILL50M swing gate motors throughout the UAE for large residential and commercial automatic swing gate installations.

Professional supply, replacement, installation and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

For correct motor selection, provide the gate leaf length, approximate gate weight, hinge dimensions, required opening angle and a clear site photo before ordering.