Rolling Shutter Tubular Motor 92mm 330Nm
Price 1,199 AEDIn Stock
92mm 330Nm Heavy-Duty Rolling Shutter Tubular Motor UAE
The Rolling Shutter Tubular Motor 92mm 330Nm is a powerful 230V heavy-duty tubular motor designed for compatible commercial and industrial rolling shutters, roller doors and automatic shutter systems. With a large 92mm motor diameter and strong 330Nm rated torque, it provides reliable automation for demanding rolling shutter applications.
This tubular shutter motor operates on 230V AC, 50Hz power and delivers 830W rated input power with a rated speed of 9 RPM. The motor features IP44 protection, Class H insulation and an S2 4-minute operating cycle.
92mm 330Nm Tubular Motor Key Features
- Heavy-duty rolling shutter tubular motor
- Tube diameter: 92mm
- Rated torque: 330Nm
- Rated voltage: 230V AC
- Rated frequency: 50Hz
- Rated power input: 830W
- Rated current: 3.80A
- Rated speed: 9 RPM
- Running time: S2 4 minutes
- Protection rating: IP44
- Insulation class: Class H
- Compact internal tubular installation
- Suitable for compatible commercial and industrial shutters
- Suitable for new installations and replacement projects
Technical Specifications
| Product Type | Rolling Shutter Tubular Motor |
| Motor Diameter | 92mm |
| Rated Torque | 330Nm |
| Rated Voltage | 230V AC |
| Rated Frequency | 50Hz |
| Rated Power Input | 830W |
| Rated Current | 3.80A |
| Rated Speed | 9 RPM |
| Running Time | S2 4 Minutes |
| Protection Rating | IP44 |
| Insulation Class | Class H |
| Installation Type | Inside Compatible Roller Tube / Shaft |
Powerful 330Nm Rolling Shutter Motor
With a rated torque of 330Nm, this tubular motor provides strong rotational force for compatible heavier rolling shutters and roller-door systems. It sits between the lower-torque 230Nm model and higher-capacity 450Nm and 550Nm motors, making it a practical choice for applications requiring substantial torque without moving to the largest tubular motor sizes.
Heavy-Duty 92mm Tubular Design
The 92mm tubular design allows the motor to be installed inside a compatible roller tube or shutter shaft. This creates a clean and compact automation system compared with externally mounted drive arrangements.
Before ordering, the internal roller tube dimensions, adapters, shaft arrangement and available installation space should be checked to confirm compatibility with the 92mm motor body.
230V AC 830W Motor
The motor operates from a 230V AC, 50Hz single-phase supply and has a rated power input of 830W. Rated current consumption is approximately 3.80A.
The electrical installation should include suitable protection, isolation and control equipment according to the shutter system and site requirements.
9 RPM Operating Speed
The 330Nm model operates at a rated speed of 9 RPM. Actual shutter opening and closing speed depends on the roller tube diameter, shutter construction and overall mechanical configuration.
S2 4-Minute Duty Rating
The motor has an S2 4-minute short-time duty rating. This means it is designed for intermittent shutter operation rather than continuous uninterrupted running.
The correct duty cycle should be respected, particularly on commercial shutters where repeated opening and closing may cause the motor temperature to increase.
IP44 Protection & Class H Insulation
The tubular motor has an IP44 protection rating and uses Class H insulation. Correct installation inside the shutter system and suitable protection from environmental exposure remain important for reliable operation.
Rolling Shutter Applications
- Commercial rolling shutters
- Industrial roller shutters
- Warehouse roller doors
- Shop and storefront shutters
- Workshop rolling shutters
- Factory roller doors
- Commercial building shutters
- Automatic roller shutter systems
- Replacement tubular motor installations
Compatible Rolling Shutter Controls
The 92mm 330Nm tubular motor can be used with a suitable 230V rolling shutter control system according to the motor wiring and installation requirements.
Depending on the selected controller, the shutter system may support functions such as OPEN, STOP and CLOSE, remote control operation, wall switches and compatible smart-control options.
How to Select the Correct Tubular Motor
The correct tubular motor should not be selected using torque alone. Before installation, check the total shutter weight, shutter width and height, roller tube diameter, curtain construction, shaft arrangement, required lifting torque and expected operating frequency.
If replacing an existing motor, compare the old motor's diameter, torque, voltage, speed, adapters, limit arrangement and shaft dimensions before ordering.
92mm Tubular Motor Range
| Motor | Torque | Typical Selection |
|---|---|---|
| 92mm Tubular Motor | 170Nm | Lower torque requirement |
| 92mm Tubular Motor | 230Nm | Medium torque requirement |
| 92mm Tubular Motor | 330Nm | Heavy-duty applications |
| 92mm Tubular Motor | 450Nm | Higher torque requirement |
| 92mm Tubular Motor | 550Nm | Highest torque option in this range |
Important: These torque levels should not be converted directly into a shutter weight rating without calculating the shutter system geometry and required torque.
Rolling Shutter Tubular Motor 92mm 330Nm UAE
We supply 92mm 330Nm rolling shutter tubular motors throughout the UAE for suitable commercial and industrial rolling shutter applications.
Supply, installation and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Before Ordering: Send the shutter width, height, approximate weight, roller tube size and existing motor label or photos so the correct tubular motor can be selected.
