SOMMER Pearl Vibe 4-Button Remote Control

SOMMER Pearl Vibe Remote Control UAE

SOMMER Pearl Vibe 4019V000 is an original 4-command gate and garage door remote control designed for compatible SOMMER automation systems. The Pearl Vibe uses advanced SOMloq2 radio technology at 868.95 MHz and provides noticeable vibration feedback when compatible radio commands are transmitted.

The transmitter also supports querying door or gate position and reception status when used with compatible bidirectional SOMloq2 systems. With an approximate radio range of 60–150 metres, four command buttons and a compact 79 × 26 × 13 mm housing, the Pearl Vibe is an excellent original SOMMER remote for automatic gates and garage door openers.

SOMMER Pearl Vibe Key Features

• Original SOMMER handheld transmitter
• Model: Pearl Vibe
• Article number: 4019V000
• 4-command / 4-button remote control
• Primary radio system: SOMloq2
• Primary radio frequency: 868.95 MHz
• Backward compatible with compatible SOMloq Rollingcode 868.8 MHz receivers
• Noticeable vibration feedback
• Door and gate position query with compatible systems
• Reception-status query with compatible systems
• Approximate radio range: 60–150 metres*
• Battery: 3V CR2032
• Dimensions: 79 × 26 × 13 mm
• Operating temperature: -25°C to +65°C
• SOMloq2 Auto-repeat function
• SOMloq2 Hop function
• Remote addition and replacement with compatible Codemaster S2 systems
• Suitable for compatible SOMMER gate motors
• Suitable for compatible SOMMER garage door openers

*Actual radio range depends on the receiver, antenna position, surrounding buildings, walls, metal structures, interference and installation environment.

SOMMER Pearl Vibe 4019V000 Technical Specifications

4-Button SOMMER Gate & Garage Remote

The SOMMER Pearl Vibe provides four independent radio commands. Depending on the receiver and automation configuration, these buttons can be programmed for different compatible gate, garage door or access functions.

A single Pearl Vibe can therefore be useful for properties with multiple compatible SOMMER automation systems.

Vibration Feedback Remote Control

The defining feature of the Pearl Vibe is its noticeable vibration feedback. With a compatible SOMloq2 system, the transmitter can provide feedback when a radio command is transmitted and received.

This provides the user with additional confirmation compared with a conventional remote control that only sends a one-way radio command.

Gate & Door Position Query

The Pearl Vibe supports querying the position of a compatible automatic gate or garage door without requiring the user to operate it first.

This functionality requires a compatible bidirectional SOMloq2 receiver or operator. It should not be assumed to work with every older SOMMER system.

SOMloq2 868.95 MHz Radio Technology

The Pearl Vibe uses SOMMER's SOMloq2 radio technology operating primarily at 868.95 MHz. SOMloq2 provides bidirectional communication with compatible receivers and supports advanced transmitter functions.

Additional SOMloq2 features include Auto-repeat and Hop functions for compatible automation systems.

60–150 Metre Radio Range

SOMMER specifies an approximate operating range of 60–150 metres, depending on the surroundings.

The actual operating distance can vary according to buildings, walls, metal structures, electrical interference, receiver antenna position, transmitter battery condition and other environmental factors.

Backward Compatible with SOMloq 868.8 MHz

The SOMMER Pearl Vibe is backward compatible with compatible operators and receivers using the older SOMloq Rollingcode FM 868.8 MHz radio system.

This makes the Pearl Vibe useful for many existing SOMMER installations as well as newer SOMloq2 automation systems.

Important: Advanced bidirectional functions such as position querying and reception feedback depend on a compatible SOMloq2 system and may not be available when the transmitter is used with an older SOMloq receiver.

CR2032 3V Battery

The Pearl Vibe uses a standard 3V CR2032 battery. The transmitter incorporates an efficient vibration system designed to provide feedback while maintaining practical battery life.

If the radio operating distance decreases significantly, the battery should be checked before investigating the receiver or automation system.

Compact 79 × 26 × 13 mm Design

With dimensions of only 79 × 26 × 13 mm, the Pearl Vibe provides four command buttons and advanced radio functions in a compact handheld design suitable for everyday use.

SOMMER Gate Motor Remote Control

The Pearl Vibe can be programmed to compatible SOMMER sliding and swing gate automation systems equipped with an appropriate SOMloq2 or supported SOMloq receiver.

Compatible applications can include SOMMER sliding gate motors, swing gate operators and other automation systems fitted with the appropriate SOMMER radio receiver.

SOMMER Garage Door Remote Control

The Pearl Vibe is also suitable for compatible SOMMER garage door openers. It can be used as an additional or replacement transmitter where the installed radio receiver supports the Pearl Vibe.

SOMMER Pearl Vibe Remote Programming

The Pearl Vibe must be learned into the compatible SOMMER receiver before operation. The exact programming procedure depends on the gate motor, garage door opener or external radio receiver installed.

Compatible SOMloq2 receivers can support advanced transmitter-management functions in addition to standard radio programming.

Remote Addition & Replacement with Codemaster S2

With compatible SOMloq2 systems, SOMMER supports remote addition and remote replacement using Codemaster S2 transmitter management.

The availability of these functions depends on the installed receiver and system configuration.

SOMMER Pearl vs Pearl Vibe

Both the standard SOMMER Pearl and Pearl Vibe provide four commands and use SOMloq2 radio technology. However, the Pearl Vibe adds noticeable vibration feedback and compatible door/gate position querying.

The Pearl Vibe also has a manufacturer-specified range of approximately 60–150 m, compared with approximately 50–140 m for the standard Pearl.

SOMMER Pearl Vibe vs Pearl Twin+

The Pearl Vibe provides four command buttons plus vibration/status functionality, while the Pearl Twin+ is designed around two large command buttons.

For users requiring several automation commands and bidirectional feedback, the Pearl Vibe is the more feature-rich choice.

Compatible Applications

• SOMMER sliding gate motors
• SOMMER swing gate operators
• SOMMER garage door openers
• Automatic villa gates
• Residential garage doors
• Commercial automatic gates
• Compatible SOMloq2 external receivers
• Compatible SOMloq Rollingcode receivers
• Replacement SOMMER remote controls
• Additional remote controls for authorised users

Check Compatibility Before Ordering

Before purchasing a SOMMER Pearl Vibe 4019V000, confirm the radio receiver installed in your automatic gate or garage door system.

If you require the Pearl Vibe's advanced vibration and position-feedback functions, make sure the installed automation supports the required bidirectional SOMloq2 technology.

SOMMER Pearl Vibe Remote Control UAE

We supply SOMMER Pearl Vibe remote controls throughout the UAE for compatible SOMMER gate and garage door automation systems.

Remote supply, programming and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Before Ordering: Confirm your existing SOMMER receiver model and radio system. If you are unsure, provide clear photos of the existing remote, automation motor and receiver so compatibility can be checked.