NICE RUN1200HS 1200 KG High-Speed Sliding Gate Motor

NICE RUN1200HS 1200 KG High-Speed Sliding Gate Motor UAE

NICE RUN1200HS is a professional high-speed sliding gate motor designed for automatic sliding gates weighing up to 1200 kg. Powered by a 24 Vdc electromechanical gearmotor with an incorporated electronic control unit, the RUN1200HS combines high-speed operation, intensive-use capability and advanced NICE BlueBUS automation technology.

With a no-load speed of up to 22 m/min (0.37 m/s), maximum starting force of approximately 790 N and 415 W power, the NICE RUN1200HS is particularly suitable for residential compounds, commercial entrances, warehouses, factories and other locations where a heavy sliding gate must open quickly and reliably.

NICE RUN1200HS Key Features

• Original NICE RUN1200HS sliding gate operator
• Designed for sliding gates up to 1200 kg
• High-Speed gate automation
• 24 Vdc electromechanical gearmotor
• 230 V AC, 50/60 Hz mains supply
• Motor power: 415 W
• Absorption: 2 A
• No-load speed: 22 m/min
• Speed at nominal torque: 19 m/min
• Maximum starting force: 790 N
• Maximum starting torque: 28.4 Nm
• Nominal force: 320 N
• Nominal torque: 8.2 Nm
• Advanced NICE BlueBUS technology
• Automatic programming of operating times
• Obstacle detection
• Adjustable acceleration and deceleration
• Self-diagnostic functions
• Electromechanical limit switch
• Master/Slave function for compatible opposing sliding gates
• Protection rating: IP44
• Operating temperature: -20°C to +50°C
• Designed for residential, commercial and industrial applications

NICE RUN1200HS Technical Specifications

1200 KG Heavy-Duty Sliding Gate Motor

The NICE RUN1200HS is engineered for sliding gates weighing up to 1200 kg. Its high starting force makes it suitable for large automatic entrances where both gate weight and opening speed are important.

Motor selection should always consider the actual gate weight, gate length, wheel and track condition, friction, installation environment and required operating frequency. The gate should move freely by hand before the automation system is installed.

High-Speed Sliding Gate Automation

The RUN1200HS belongs to the NICE Hi-Speed range and provides a no-load movement speed of approximately 22 metres per minute, or around 0.37 m/s.

This makes it particularly useful for busy vehicle entrances where reducing gate opening and closing time can improve traffic flow and minimise the amount of time the entrance remains open.

24 Vdc Electromechanical Gate Motor

The NICE RUN1200HS uses a 24 Vdc electromechanical gearmotor combined with an integrated electronic control system. The low-voltage motor architecture allows advanced electronic management of gate movement, speed, acceleration, deceleration and obstacle detection.

NICE BlueBUS Technology

The RUN1200HS incorporates NICE BlueBUS technology, simplifying the connection of compatible NICE safety and control accessories.

Compatible BlueBUS devices can communicate with the control unit using a two-wire connection, reducing wiring complexity for photocells and other supported automation accessories.

Obstacle Detection

The integrated control system provides obstacle detection during gate operation. The controller monitors the automation and can react when abnormal resistance is detected during movement.

Obstacle detection is an additional automation feature and does not replace correctly installed safety devices such as photocells and safety edges where required.

Adjustable Acceleration & Deceleration

The NICE RUN1200HS allows acceleration and deceleration to be managed at the beginning and end of gate movement. Controlled ramping helps provide smoother operation despite the high travelling speed of the motor.

This is especially useful on large sliding gates where sudden starts and stops could otherwise create unnecessary mechanical stress.

Automatic Programming of Gate Travel

The integrated NICE control electronics support automatic programming of opening and closing operating times, simplifying commissioning after the motor has been mechanically installed and the required accessories connected.

Self-Diagnostic System

The RUN1200HS provides built-in self-diagnostic functions. The automation can communicate operating or fault information through its signalling system, helping technicians diagnose installation and operating problems.

Temperature Management

The NICE RUN series incorporates temperature monitoring that allows the automation electronics to adapt motor-force management, thermal protection and ventilation according to operating conditions.

The RUN1200HS has a manufacturer-specified operating temperature range of -20°C to +50°C.

Master & Slave Sliding Gate Operation

For compatible installations using two opposing sliding gates, NICE provides a Master/Slave function that allows two RUN motors to be synchronised.

This is useful for large entrances where two sliding gate leaves move in opposite directions and need coordinated automatic operation.

NICE RUN1200HS for Intensive Use

The RUN1200HS is designed for demanding automatic sliding gate applications and is suitable for locations requiring frequent operation.

Typical applications include commercial entrances, warehouses, factories, residential compounds, gated communities and other controlled vehicle entrances.

Electromechanical Limit Switch

The standard RUN1200HS uses an electromechanical limit-switch system to identify the required end positions of gate travel.

NICE also offers related accessories for different installation requirements. The correct limit-switch configuration should be confirmed according to the exact RUN model and installation.

NICE RUN1200HS Safety Accessories

A professional RUN1200HS installation can incorporate compatible NICE safety and signalling accessories such as:

• NICE BlueBUS photocell sensors
• Safety edges
• Flashing warning lights
• Key switches
• Push buttons
• Radio receivers and remote controls
• Access control systems
• GSM gate openers

NICE RUN1200HS Kit

Our NICE RUN1200HS package can be supplied with the components required for a complete automatic sliding gate installation. Package contents may vary according to the selected configuration.

• 1 × NICE RUN1200HS High-Speed Sliding Gate Motor
• 1 × Integrated NICE control unit
• 2 × NICE remote controls
• 1 × NICE OXI radio receiver
• 1 Pair × NICE BlueBUS photocell sensors
• 4 × 1 metre nylon gate racks
• 1 × Push button
• 1 × Motor fixing bracket

Note: Exact remote-control model, control-board revision and accessories can vary according to the supplied kit. Please confirm the package contents before ordering.

NICE RUN1200HS Applications

• Heavy automatic sliding gates
• Residential compounds
• Large villas
• Commercial buildings
• Warehouse entrances
• Factory gates
• Industrial entrances
• Gated communities
• Staff parking entrances
• High-traffic vehicle access points

NICE RUN1200HS Sliding Gate Motor UAE

We supply NICE RUN1200HS 1200 KG high-speed sliding gate motors throughout the UAE for residential, commercial and industrial automatic gate applications.

Supply, professional installation and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Before Ordering: Confirm the sliding gate weight, gate length, track condition, required opening speed and expected daily usage so the correct NICE gate motor can be selected for the installation.