SOMMER 24V Gate Warning Light
Price 350 AEDIn Stock
SOMMER 24V Gate Warning Light UAE
SOMMER 5069V001 is an original 24V DC warning light for automatic gate automation systems. Designed for compatible SOMMER sliding gates, swing gates and other automation applications, the warning lamp provides a clear visual indication when the automatic gate system is operating.
The SOMMER warning light features an IP44-rated housing, E14 lamp holder and 25 W bulb. It operates from a 24V DC supply and is designed to be connected to the appropriate warning-light output of a compatible gate control board.
SOMMER 5069V001 Key Features
- Original SOMMER gate automation accessory
- Article number: 5069V001
- Product type: Automatic Gate Warning Light
- Operating voltage: 24V DC
- Protection rating: IP44
- Lamp holder: E14
- Lamp power: 25 W
- Bulb included
- Not self-blinking
- Visual warning during automatic gate operation
- Suitable for compatible SOMMER gate automation systems
- Suitable for residential and commercial entrances
SOMMER Warning Light Technical Specifications
| Brand | SOMMER |
| Article Number | 5069V001 |
| Product Type | Gate Automation Warning Light |
| Operating Voltage | 24V DC |
| Protection Rating | IP44 |
| Lamp Holder | E14 |
| Lamp Power | 25 W |
| Bulb | Included |
| Self-Flashing | No |
| Application | Compatible Automatic Gate Automation Systems |
24V Automatic Gate Warning Light
The SOMMER 5069V001 operates from a 24V DC supply and is intended to provide a visible warning while a compatible automatic gate system is operating.
The warning light should be connected only to a compatible control-board output with the correct voltage and load capacity. Always check the gate motor control-board specification before installation.
Visual Warning for Automatic Gates
A gate warning light helps make automatic gate movement more noticeable to drivers, pedestrians and other people near the entrance.
Depending on the connected SOMMER control board and its programming, the warning light can indicate gate movement or other gate operating conditions.
Important – Not Self-Blinking
The SOMMER 5069V001 is not a self-blinking warning light. The lamp itself does not contain an independent flashing circuit.
The required flashing behaviour must therefore be provided by the compatible gate automation control system. This is important when replacing another flashing light because not every gate control board provides the same output behaviour.
IP44 Protection
The SOMMER warning light has an IP44 protection rating. When correctly installed, the enclosure provides protection appropriate for its intended gate automation application.
The mounting position, electrical connections and cable entry should be correctly installed to maintain suitable protection and reliable operation.
E14 25W Warning Lamp
The warning light uses an E14 lamp holder and SOMMER specifies a 25 W bulb. The original product is supplied with the bulb included.
When replacing the lamp, use the correct lamp type and electrical rating specified for the warning light.
SOMMER Sliding Gate Warning Light
The SOMMER warning light can be used with compatible SOMMER sliding gate automation systems where the control board provides the required 24V warning-light output.
A properly positioned signal light gives a visible indication when the sliding entrance is opening or closing.
SOMMER Swing Gate Warning Light
The 5069V001 can also be used with compatible SOMMER swing gate automation. This is useful for villa gates, residential entrances and commercial swing gates where a visual operating signal is required.
Gate Warning Light Applications
- Automatic sliding gates
- Automatic swing gates
- Villa entrance gates
- Residential compounds
- Commercial entrances
- Warehouse gates
- Industrial entrances
- Compatible SOMMER gate automation systems
Replacement SOMMER Warning Light
The SOMMER 5069V001 can be used as a replacement warning light where the existing gate automation system is electrically compatible.
Before ordering a replacement, check the existing light article number, control-board output voltage, required flashing behaviour and lamp load. A similar-looking warning light should not automatically be assumed compatible.
SOMMER Warning Light Installation
The warning light should be mounted in a clearly visible position near the automatic entrance while remaining protected from accidental impact.
Electrical installation should be carried out according to the SOMMER control-board wiring instructions. Confirm the correct 24V DC output and terminal connections before powering the system.
SOMMER Gate Safety Accessories
A warning light is one component of a complete automatic gate installation. Depending on the gate design and application, the system can also include compatible safety and access-control equipment such as:
- Photocell safety sensors
- Reflective photocell sensors
- Safety edges
- Remote controls
- Key switches
- Push buttons
- GSM gate openers
- RFID access control
SOMMER Warning Light UAE
We supply SOMMER 24V gate warning lights throughout the UAE for compatible SOMMER automatic gate systems.
Supply, installation and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Before Ordering: Confirm that your gate control board provides the correct 24V DC warning-light output. The SOMMER 5069V001 is not self-blinking, so flashing operation depends on the connected control system.