NICE ROA37 230V Control Board for THOR TH1500

NICE ROA37 230V Sliding Gate Motor Control Board UAE

NICE ROA37 is a genuine NICE 230V electronic control board designed for compatible NICE automatic sliding gate motors including the THOR TH1500, RO500 and RO1070. It is an ideal replacement control unit for repairing a damaged or faulty original ROA37 board while maintaining the correct NICE automation functions.

The ROA37 manages the main operating functions of the sliding gate automation, including opening, closing, step-by-step commands, automatic closing, photocell safety input, flashing-light output and motor-force control. It also supports compatible NICE radio-control equipment for remote gate operation.

NICE ROA37 Key Features

• Genuine NICE replacement control board
• Model: ROA37
• Control unit voltage: 230V
• Designed for NICE sliding gate automation
• Compatible with NICE THOR TH1500
• Compatible with NICE RO500
• Compatible with NICE RO1070
• Controls gate opening and closing functions
• Step-by-step command management
• Automatic closing programming
• Photocell safety input management
• Flashing-light output
• Motor force adjustment
• Compatible radio receiver support
• Suitable for repair and replacement of existing ROA37 boards

NICE ROA37 Technical Specifications

NICE THOR TH1500 Control Board

The NICE ROA37 is the correct control unit for the NICE THOR TH1500 sliding gate motor. If the original TH1500 board has been damaged by age, electrical faults or component failure, replacing it with the correct ROA37 control unit can restore the motor's automation functions.

Before replacement, the motor, capacitor, limit switches, photocells, power supply and connected accessories should also be checked to ensure that an external fault did not cause the original board failure.

Compatible with NICE RO500 & RO1070

The ROA37 is not limited only to the THOR TH1500. NICE documentation also specifies the ROA37 control unit for the NICE RO500 and RO1070 sliding gate operators.

This makes ROA37 a replacement control-board solution for several compatible older NICE 230V sliding gate automation systems.

NICE ROA37 Gate Control Functions

The ROA37 manages the electrical operation of the connected sliding gate motor and processes commands from compatible control and safety devices.

• Gate opening command
• Gate closing command
• Step-by-step operation
• Automatic closing
• Photocell safety command
• Limit-switch management
• Motor force adjustment
• Flashing warning light
• Radio remote-control commands

Motor Force Adjustment

The NICE ROA37 provides electronic motor-force management for compatible sliding gate operators. Correct force adjustment is important for reliable gate movement and safe automation operation.

The force setting should never be increased simply to compensate for damaged wheels, a misaligned gate, dirty track or excessive mechanical resistance. The sliding gate should move freely by hand before the automation is commissioned.

Photocell Safety Connection

Compatible safety photocells can be connected to the ROA37 to provide obstacle-detection functionality. When the photocell beam is interrupted, the control board responds according to its programmed safety logic.

Correct photocell wiring and safety testing should always be completed before the automatic gate is returned to normal service.

Automatic Closing Function

The NICE ROA37 supports automatic gate closing. When correctly configured, the control board can automatically close the sliding gate after the programmed pause time.

Automatic closing should only be enabled when the required safety devices are correctly installed and tested.

Remote Control & Radio Receiver

The ROA37 can operate with compatible NICE radio-control equipment, allowing the sliding gate to be opened and closed using compatible NICE remote controls.

The exact transmitter compatibility depends on the radio receiver installed with the control board. Always identify the receiver before selecting replacement or additional remote controls.

NICE ROA37 Compatible Accessories

• NICE remote controls
• Compatible NICE radio receivers
• NICE photocell safety sensors
• NICE flashing lights
• Push buttons
• Key switches
• GSM gate openers
• Access control systems
• Vehicle loop detectors with compatible dry-contact output

When Should the NICE ROA37 Be Replaced?

A replacement ROA37 may be required when the existing board has suffered confirmed electronic failure and cannot be economically repaired. Possible symptoms can include failure to respond to commands, abnormal motor operation, damaged output circuits or visible electronic damage.

However, these symptoms do not automatically mean that the control board is defective. The power supply, motor, capacitor, limit switches, safety devices and wiring should be professionally tested before replacing the PCB.

Check Compatibility Before Ordering

Before ordering a NICE ROA37 replacement control board, check the model of the existing gate motor and the reference printed on the original PCB.

For the safest identification, compare the existing board with the replacement ROA37 and confirm the motor model. This is particularly important on older NICE automation systems that may have been repaired or modified previously.

NICE ROA37 Control Board UAE

We supply NICE ROA37 control boards throughout the UAE for compatible NICE THOR TH1500, RO500 and RO1070 sliding gate automation systems.

Supply, replacement, programming and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Before Ordering: Send us the NICE gate motor model and a clear photo of the existing control board label so the correct replacement PCB can be confirmed.