BFT I099704 Spring for MOOVI 30 Parking Barrier

BFT I099704 Counterbalance Spring for MOOVI 30 Barrier UAE

BFT I099704 Spring for MOOVI 30 is a replacement counterbalance spring kit designed for the BFT MOOVI 30 automatic parking barrier. The spring helps balance the weight of the boom arm, allowing the barrier mechanism to open and close smoothly while reducing unnecessary load on the motor and mechanical components.

This replacement spring is suitable for maintenance and repair of BFT MOOVI 30 parking gate barriers where the existing spring is worn, damaged, broken or no longer providing correct boom balancing.

BFT MOOVI 30 Spring Key Features

• Replacement spring for BFT MOOVI 30
• Product reference: I099704
• Designed for automatic parking barriers
• Counterbalances the barrier boom weight
• Supports smooth opening and closing
• Reduces unnecessary load on the barrier mechanism
• Suitable for maintenance and replacement
• Professional BFT parking barrier spare part
• Suitable for residential and commercial parking systems

BFT I099704 MOOVI 30 Spring Technical Specifications

What Does the BFT MOOVI 30 Spring Do?

The MOOVI 30 counterbalance spring is an important mechanical component of the parking barrier. It counterbalances the weight of the boom arm so that the barrier motor does not have to lift the full boom weight during every operating cycle.

Correct spring tension helps provide smooth boom movement, reduces mechanical stress and supports reliable opening and closing of the parking barrier.

BFT MOOVI 30 Boom Balancing

The BFT MOOVI 30 is designed for vehicle entrances with a clear opening of approximately 3 metres. A correctly selected and adjusted counterbalance spring works together with the barrier mechanism to balance the installed boom configuration.

Correct balancing is especially important after replacing the boom arm, spring or other mechanical barrier components.

Signs of a Worn or Damaged MOOVI 30 Spring

• Barrier boom feels unusually heavy during manual movement
• Boom does not remain correctly balanced
• Barrier motor struggles during opening
• Opening or closing movement becomes uneven
• Spring shows visible corrosion, deformation or damage
• Spring has broken
• Excessive mechanical load is placed on the barrier motor

BFT I099704 Replacement Spring

The BFT I099704 spring is suitable when servicing or repairing a compatible MOOVI 30 barrier with a damaged or worn counterbalance spring.

Before replacement, the complete barrier mechanism should be inspected. The condition of the boom arm, arm holder, rotating plate, shaft, fixing hardware and other balancing components should also be checked.

Spring Replacement After Vehicle Impact

If a parking barrier has been struck by a vehicle, do not assume that only the boom arm is damaged. An impact can also affect the counterbalance spring, boom holder, rotating plate, barrier shaft and internal mechanical assembly.

The complete mechanism should be inspected before installing replacement parts and returning the barrier to automatic operation.

MOOVI 30 Spring Adjustment

Correct spring adjustment is essential after installation. The spring must provide suitable counterbalance for the actual boom arm and accessories installed on the barrier.

The barrier should first be checked in manual release mode to confirm that the boom is correctly balanced and moves smoothly. Powered opening and closing should only be tested after the mechanical setup has been verified.

BFT MOOVI 30 Compatible Boom

The BFT MOOVI 30 is commonly configured with the BFT AQ3 3 metre boom arm. The exact boom and accessory configuration should be confirmed when setting the spring tension because additional boom accessories can change the overall balancing requirement.

Why Correct Barrier Spring Balancing Matters

An incorrectly balanced parking barrier can place excessive load on the motor and mechanical transmission. Correct counterbalancing helps the barrier operate smoothly and reduces unnecessary mechanical strain during repeated opening and closing cycles.

Spring adjustment should therefore be performed whenever the spring, boom arm or other significant boom accessories are replaced.

BFT MOOVI 30 Spring Applications

• Commercial parking entrances
• Residential communities
• Office building parking
• Warehouse entrances
• Factory vehicle access
• Hotels and hospitals
• Private car parks
• Staff parking areas
• Automatic vehicle access-control systems

BFT MOOVI 30 Spring UAE

We supply BFT I099704 springs for MOOVI 30 parking barriers throughout the UAE for maintenance, repair and replacement of automatic parking barrier systems.

Supply, replacement and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Before Ordering: Confirm that your parking barrier is a BFT MOOVI 30 and check the existing spring and boom configuration to ensure the correct replacement part is selected.