BFT MITTO COOL C2 2-Button Gate Remote Control
Price 50 AEDIn Stock
BFT MITTO COOL C2 2-Button 433MHz Gate Remote UAE
BFT MITTO COOL C2 is an original BFT 2-button / 2-channel gate remote control designed for compatible BFT automatic gate, parking barrier and garage door systems. Operating on the 433 MHz radio frequency, this compact blue transmitter provides convenient wireless control for residential, commercial and professional gate automation applications.
The BFT MITTO COOL C2 D112306 features two programmable channels, a nominal operating range of approximately 50–100 metres and a compact lightweight housing. It is powered by a single 3V CR2032 battery and can be used as an additional or replacement transmitter where receiver compatibility is confirmed.
BFT MITTO COOL C2 Key Features
- Original BFT remote control transmitter
- Model: MITTO COOL C2
- Product code: D112306
- International code: 2614118
- 2 buttons / 2 channels
- Operating frequency: 433 MHz
- Nominal operating range: approximately 50–100 metres
- Power supply: 3V
- Battery: 1 × CR2032
- Colour: Blue
- Weight: approximately 20 g
- Compact handheld transmitter
- Suitable for compatible BFT automation receivers
- Suitable for compatible gates, barriers and garage doors
BFT MITTO COOL C2 Technical Specifications
| Brand | BFT |
| Model | MITTO COOL C2 |
| Product Code / MPN | D112306 |
| International Code | 2614118 |
| Product Type | Gate Automation Remote Control Transmitter |
| Number of Buttons | 2 |
| Number of Channels | 2 |
| Frequency | 433 MHz |
| Operating Range | Approximately 50–100 m |
| Power Supply | 3 V |
| Battery | 1 × CR2032 |
| Colour | Blue |
| Weight | Approximately 20 g |
| Interconnectivity | No |
2-Button BFT Gate Remote Control
The MITTO COOL C2 provides two programmable radio channels. Depending on the BFT receiver and control-board configuration, these buttons can be assigned to compatible automation commands such as full gate opening, pedestrian opening or operation of another compatible entrance.
The two-channel configuration makes the C2 a practical choice for users who need simple control of one or two automation functions without requiring a four-button transmitter.
433MHz BFT Remote Control
The BFT MITTO COOL C2 operates on the 433 MHz radio frequency and is intended for compatible BFT radio receiving systems.
Important: Frequency alone does not guarantee remote compatibility. The receiver and radio coding system installed in the automation must also support the transmitter.
50–100 Metre Nominal Operating Range
The BFT MITTO COOL C2 provides a nominal transmission range of approximately 50 to 100 metres under suitable conditions.
Actual remote-control distance can vary according to receiver antenna position, surrounding buildings, walls, vehicles, electrical interference and other environmental conditions.
CR2032 Battery Powered
The MITTO COOL C2 operates from a single 3V CR2032 coin-cell battery. The compact battery helps keep the transmitter lightweight and can be easily replaced when the battery becomes weak.
BFT MITTO COOL C2 Compatibility
The BFT MITTO COOL C2 is designed for compatible BFT radio receivers and automation systems. Typical applications can include:
- BFT sliding gate motors
- BFT swing gate motors
- BFT parking gate barriers
- BFT garage door openers
- BFT automatic vehicle entrances
- Compatible BFT external radio receivers
BFT MITTO COOL C2 Remote Programming
The MITTO COOL C2 must be memorized into a compatible BFT receiver or control system before use. The exact programming procedure depends on the BFT receiver or control board installed in the automation system.
Before programming or purchasing a replacement remote, identify the existing receiver and remote model to confirm compatibility.
BFT MITTO COOL C2 Replacement Remote
The MITTO COOL C2 can be used as an additional or replacement transmitter for compatible BFT automation systems. When replacing an older BFT remote, check the receiver frequency and coding compatibility rather than selecting a replacement based only on appearance.
BFT MITTO COOL C2 vs MITTO COOL C4
| Specification | MITTO COOL C2 | MITTO COOL C4 |
|---|---|---|
| Buttons | 2 | 4 |
| Channels | 2 | 4 |
| Frequency | 433 MHz | 433 MHz |
| Battery | CR2032 | CR2032 |
| Best For | Up to 2 commands | Up to 4 commands |
BFT MITTO COOL C2 Applications
- Villa automatic gates
- Residential driveway gates
- Sliding gate motors
- Swing gate motors
- Parking gate barriers
- Garage door openers
- Commercial property entrances
- Office and building parking entrances
BFT MITTO COOL C2 Remote Control UAE
We supply BFT MITTO COOL C2 remote controls throughout the UAE for compatible BFT gate motors, garage door openers and parking barrier systems.
Supply, compatibility checking and remote programming support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Compatibility Check: Before ordering, confirm your existing BFT remote and receiver model. A matching radio frequency alone does not guarantee compatibility.
