BFT MITTO B RCB04 R1 4-Button Gate Remote Control
Price 50 AEDIn Stock
BFT MITTO B RCB04 R1 4-Button 433.92MHz Rolling Code Remote UAE
BFT MITTO B RCB04 R1, commonly known as the BFT MITTO4, is a genuine 4-button / 4-channel 433.92 MHz rolling code remote control designed for compatible BFT automatic gate, parking barrier and garage door systems.
With four programmable channels, the MITTO B RCB04 R1 allows multiple compatible automation commands or systems to be controlled from one compact transmitter. It is suitable for residential villas, commercial entrances, parking barriers, garage doors and multi-gate properties throughout the UAE.
BFT MITTO B RCB04 R1 Key Features
- Original BFT remote control transmitter
- Model: MITTO B RCB04 R1
- Common name: BFT MITTO4
- Product code: D111906
- 4 buttons / 4 channels
- Operating frequency: 433.92 MHz
- Coding system: Rolling Code
- Operating range: approximately 50–100 metres
- Power supply: 12 V
- Battery type: 23A / A23
- Compact handheld transmitter
- Suitable for compatible BFT gate automation systems
- Suitable for compatible BFT parking barriers
- Suitable for compatible BFT garage door openers
BFT MITTO B RCB04 R1 Technical Specifications
| Brand | BFT |
| Model | MITTO B RCB04 R1 |
| Common Name | BFT MITTO4 |
| Product Code / MPN | D111906 |
| Product Type | Gate Automation Remote Control Transmitter |
| Number of Buttons | 4 |
| Number of Channels | 4 |
| Frequency | 433.92 MHz |
| Coding | Rolling Code |
| Operating Range | Approximately 50–100 m |
| Power Supply | 12 V |
| Battery | 23A / A23 |
| Programming | Compatible BFT Receiver / Supported Remote Programming |
4-Button BFT Gate Remote Control
The BFT MITTO B RCB04 R1 features four programmable buttons providing up to four independent radio channels. Depending on the receiver and control-board configuration, each button can operate a different automation command or compatible BFT system.
For example, one transmitter may be configured to operate a main entrance gate, a second gate, a garage door or another compatible automation function.
433.92 MHz Rolling Code Technology
The MITTO B RCB04 R1 operates at 433.92 MHz using BFT rolling code technology. Rolling code provides a changing radio transmission code rather than repeatedly transmitting a simple fixed code.
When replacing an existing remote, the receiver and coding system must also be compatible. A matching 433.92 MHz frequency alone does not guarantee compatibility.
50–100 Metre Operating Range
BFT specifies a nominal transmitter range of approximately 50 to 100 metres. Actual operating distance can vary depending on the receiver antenna, installation position, nearby buildings, radio interference and environmental conditions.
12V 23A Battery Powered
The BFT MITTO4 is powered by a 12V 23A / A23 battery. The battery is compact, widely available and can be replaced when transmitter range begins to decrease.
Compatible BFT Automation Systems
The BFT MITTO B RCB04 R1 can operate compatible BFT radio receivers used with a wide range of BFT automation equipment, including:
- BFT sliding gate motors
- BFT swing gate motors
- BFT parking gate barriers
- BFT garage door openers
- BFT automatic entrance systems with compatible receivers
Popular BFT Gate Motors Using MITTO Remote Controls
The MITTO B RCB04 R1 is commonly supplied with compatible BFT automation kits including selected DEIMOS, ARES, ICARO, ATHOS, PHOBOS and KUSTOS gate automation systems.
Compatibility depends primarily on the installed BFT receiver and radio coding system rather than only the gate motor model.
BFT MITTO B RCB04 Remote Programming
The remote can be memorized into a compatible BFT radio receiver. Depending on the receiver and installation configuration, programming may be carried out directly through the receiver or by supported remote-to-remote memorization.
If you are unsure which BFT remote is compatible with your gate, check the existing transmitter model and receiver before ordering.
BFT MITTO B RCB02 vs MITTO B RCB04
| Specification | MITTO B RCB02 R1 | MITTO B RCB04 R1 |
|---|---|---|
| Product Code | D111904 | D111906 |
| Buttons | 2 | 4 |
| Channels | 2 | 4 |
| Frequency | 433.92 MHz | 433.92 MHz |
| Coding | Rolling Code | Rolling Code |
| Range | 50–100 m | 50–100 m |
| Best For | Up to 2 commands | Up to 4 commands |
BFT MITTO4 Remote Control UAE
We supply BFT MITTO B RCB04 R1 remote controls throughout the UAE for compatible automatic gates, garage doors and parking barrier systems.
Remote supply, compatibility checking and programming support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Compatibility Check: Before ordering, confirm the model and coding system of your existing BFT remote or radio receiver. Frequency alone should not be used to determine compatibility.
