BFT ALENA SW2 230V Swing Gate Control Board

BFT ALENA SW2 230V Swing Gate Motor Control Board UAE

BFT ALENA SW2 is an electronic 230V swing gate motor control board designed for compatible BFT automatic swing gate operators. It is commonly used with the BFT ATHOS AC series, including ATHOS AC A25 and ATHOS AC A40 operators.

The ALENA SW2 manages single- or double-leaf swing gate automation and provides the main electronic functions required for motor movement, slowdown, automatic operation, pedestrian access, safety accessories and compatible BFT radio controls.

BFT ALENA SW2 Key Features

• Original BFT swing gate control unit
• Model: ALENA SW2
• Designed for compatible 230V swing gate operators
• Suitable for single- and double-leaf swing gate automation
• Compatible with BFT ATHOS AC series applications
• Supports opening and closing gate control
• Slowdown management
• Automatic closing function
• Pedestrian opening function
• Compatible safety-device connections
• Photocell sensor integration
• Flashing light connection
• Compatible BFT radio remote-control operation
• Suitable for replacement and gate automation maintenance

BFT ALENA SW2 Technical Specifications

Control Board for BFT ATHOS AC Swing Gate Motors

The BFT ALENA SW2 is used as the control unit with compatible BFT ATHOS AC swing gate automation systems. It manages the operation of the swing gate motors together with connected safety and command accessories.

Compatible applications include BFT ATHOS AC installations such as:

• BFT ATHOS AC A25
• BFT ATHOS AC A40
• Compatible ATHOS AC left- and right-hand operator configurations

Compatibility should always be confirmed using the existing control-board reference and operator model before replacement.

BFT ATHOS AC A25 Control Board

The BFT ATHOS AC A25 is a 230V swing gate operator designed for gate leaves up to approximately 2.5 metres, with the maximum permitted gate weight depending on the installation configuration. The ALENA SW2 is used to manage compatible ATHOS AC A25 swing gate automation.

BFT ATHOS AC A40 Control Board

The BFT ATHOS AC A40 is a 230V swing gate operator designed for gate leaves up to approximately 4 metres. Your ATHOS AC A40 automation configuration uses the ALENA SW2 control unit.

Single & Double Swing Gate Control

The BFT ALENA SW2 can manage compatible single- or double-leaf swing gate automation. In a double-leaf installation, the control system coordinates the operation of both gate operators according to the programmed operating sequence.

This makes the ALENA SW2 suitable for villa driveways, residential entrances and compatible commercial swing gate installations.

Opening & Closing Slowdown

The ALENA SW2 supports slowdown management for compatible BFT swing gate operators. Correctly configured slowdown helps provide smoother movement as the gate approaches its opening and closing positions.

Correct programming is important because compatible ATHOS AC operators use work-time-based travel management rather than conventional built-in travel limit switches.

Automatic Closing Function

The BFT ALENA SW2 supports automatic closing. When correctly configured, the gate can close automatically after the programmed pause period.

Automatic closing should only be used with correctly installed and tested safety devices appropriate to the gate installation.

Pedestrian Opening

The pedestrian opening function allows partial operation of a compatible swing gate entrance without requiring the complete normal vehicle-access cycle.

This is particularly useful for residential villas and properties where the same automatic gate is used for both vehicle and pedestrian access.

Photocell & Gate Safety Accessories

The ALENA SW2 can be integrated with compatible gate automation safety and command accessories, including photocell sensors, push buttons and other supported control devices.

Safety accessories must be correctly wired, configured and tested during installation or control-board replacement.

BFT Remote Control Operation

Compatible BFT radio equipment can be used with the ALENA SW2 automation system to operate the gate using BFT remote controls.

Remote compatibility depends on the radio receiver and transmitter technology installed with the control system. Always verify the existing receiver before purchasing replacement or additional transmitters.

BFT ALENA SW2 Replacement Control Board

The ALENA SW2 can be used as a replacement control unit when the original compatible BFT swing gate PCB has failed or become damaged.

Before installing a replacement board, a technician should check the gate motors, capacitors, photocells, flashing light, accessory wiring, power supply and field cables. An external short circuit or faulty accessory can damage a new control board if the original problem is not corrected first.

BFT ALENA SW2 Compatibility

The ALENA SW2 should be selected according to the exact BFT operator and existing control-board configuration. Do not purchase a replacement board based only on the fact that the motor operates at 230V.

Recommended before ordering: Check the existing board label and motor model, or send us clear photos of both so compatibility can be confirmed.

BFT ALENA SW2 Control Board UAE

We supply BFT ALENA SW2 control boards throughout the UAE for compatible BFT automatic swing gate systems, including replacement, installation and programming support.

Supply and technical support are available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.

Before Ordering: Confirm your BFT swing gate motor model and existing control-board reference to ensure the correct replacement PCB is selected.