BENINCA TO.GO2VA 433.92 MHz ARC & Rolling Code Remote
Price 50 AEDIn Stock
BENINCA TO.GO2VA 433.92 MHz ARC & Rolling Code Remote UAE
BENINCA TO.GO2VA is a professional 2-channel 433.92 MHz gate remote control featuring dual radio coding: 128-bit Advanced Rolling Code (ARC) and BENINCA Rolling Code (HCS). It is designed for compatible BENINCA automatic gates, garage doors, barriers and automation receivers.
The TO.GO2VA is factory configured in ARC mode for enhanced radio security, but it can also be configured for traditional BENINCA HCS Rolling Code or mixed ARC + Rolling Code operation. This makes TO.GO2VA particularly useful for both newer BENINCA automation systems and compatible older installations.
BENINCA TO.GO2VA Key Features
- Genuine BENINCA gate remote control
- Official model: TO.GO2VA
- 2-channel transmitter
- 2 operating buttons
- 433.92 MHz frequency
- Dual radio coding technology
- 128-bit Advanced Rolling Code (ARC)
- BENINCA HCS Rolling Code
- ARC coding configured from factory
- Can be configured for ARC-only operation
- Can be configured for HCS Rolling Code operation
- Supports mixed ARC + Rolling Code configuration
- Distinctive green operating buttons
- LED transmission and programming indicator
- 12V battery
- Long battery life
- Up to 230 m range in a free open area
- Compact handheld design
- Optional BENINCA TO.CLIP car accessory
- Optional BENINCA SMART wall accessory
BENINCA TO.GO2VA Technical Specifications
| Brand | BENINCA |
| Model | TO.GO2VA |
| Product Type | Gate & Garage Door Remote Control |
| Channels | 2 |
| Frequency | 433.92 MHz |
| Primary Coding | 128-bit Advanced Rolling Code (ARC) |
| Secondary Coding | BENINCA Rolling Code (HCS) |
| Factory Setting | ARC |
| Mixed Coding | Yes – ARC + HCS Rolling Code |
| Button Colour | Green |
| LED Indicator | Yes |
| Battery | 12V |
| Maximum Range | Up to 230 m in Free Open Area |
| Dimensions | 65 × 40 × 14 mm |
128-Bit Advanced Rolling Code Technology
The BENINCA TO.GO2VA incorporates Advanced Rolling Code (ARC), BENINCA's 128-bit radio coding technology. ARC provides a very high number of possible transmitted-code combinations and is designed to provide secure radio control for compatible BENINCA automation systems.
The TO.GO2VA leaves the factory configured in ARC mode, making it ready for modern BENINCA receivers supporting Advanced Rolling Code.
ARC + HCS Rolling Code in One Remote
A major advantage of the BENINCA TO.GO2VA is its ability to work with both modern ARC coding and traditional BENINCA HCS Rolling Code.
The transmitter can be configured in three operating modes:
- ARC Mode – Advanced Rolling Code operation
- HCS Mode – Traditional BENINCA Rolling Code operation
- Mixed Mode – ARC and HCS Rolling Code available on the same transmitter
This dual-coding capability makes the TO.GO2VA particularly useful when maintaining existing BENINCA installations while also supporting newer ARC-compatible automation systems.
Mixed Coding Configuration
When the TO.GO2VA is configured for mixed operation, BENINCA allows different coding technologies to be assigned to the transmitter buttons. This means the same remote can operate compatible automation systems using different BENINCA radio coding generations.
This can be useful where a property has more than one BENINCA automation system, for example an older automatic gate and a newer garage door opener.
Up to 230 Metres Open-Air Range
BENINCA specifies a radio range of up to 230 metres in a free open area for the TO.GO2VA.
Actual operating range can vary according to the receiver, antenna installation, walls, buildings, vehicles, electrical equipment and local radio interference. The 230 m figure should therefore be considered an ideal open-area maximum rather than a guaranteed range at every installation.
BENINCA TO.GO2VA Programming
The TO.GO2VA must be memorized into a compatible BENINCA radio receiver or control unit. The exact programming procedure depends on the receiver or control board installed in the gate automation system.
- Confirm the BENINCA receiver or control-board model.
- Confirm whether the receiver uses ARC or HCS Rolling Code.
- Set the TO.GO2VA to the required coding mode.
- Enter transmitter-learning mode on the receiver or control panel.
- Press the required button on the TO.GO2VA.
- Confirm that the receiver has stored the transmitter.
- Exit programming and test the automation.
Important: Programming procedures vary between BENINCA receivers. Always follow the instructions for the specific receiver or control board installed at the site.
TO.GO2VA vs TO.GO2AK
| Specification | TO.GO2VA | TO.GO2AK |
|---|---|---|
| Channels | 2 | 2 |
| Frequency | 433.92 MHz | 433.92 MHz |
| ARC | Yes | Yes |
| HCS Rolling Code | Yes | No |
| Fixed Code | No | Yes |
| Best Use | ARC + Older HCS Systems | ARC + Fixed Code Systems |
Which BENINCA Remote Should You Choose?
Choose BENINCA TO.GO2VA when your automation system requires ARC or BENINCA HCS Rolling Code. Choose TO.GO2AK when the installation requires ARC or traditional Fixed Code compatibility.
Frequency alone does not guarantee compatibility. Two transmitters can both operate at 433.92 MHz while using different coding technologies, so the installed receiver should always be checked before ordering.
BENINCA TO.GO2VA Applications
- BENINCA sliding gate motors
- BENINCA swing gate motors
- BENINCA garage door openers
- BENINCA parking barriers
- Automatic villa gates
- Residential gate automation
- Commercial gate automation
- Compatible BENINCA ARC receivers
- Compatible BENINCA HCS Rolling Code receivers
BENINCA TO.GO2VA Remote Control UAE
We supply BENINCA TO.GO2VA 433.92 MHz gate remote controls throughout the UAE with programming and compatibility support for suitable BENINCA gate, garage door and barrier automation systems.
Available across Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, Fujairah, Umm Al Quwain and Al Ain.
Compatibility Check: If you are unsure whether TO.GO2VA is suitable for your system, send clear photos of your existing remote and the BENINCA receiver or control board before ordering.
